Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Gate Repair in West Hollywood, CA
Gate access control in West Hollywood usually means one thing: the video intercom or keypad at the driveway stopped talking to the smartphone inside the house, and now a delivery driver is standing on Santa Monica Boulevard holding a package with nowhere to put it. Homes in West Hollywood’s 1.9 square miles run dense and automated at a rate you won’t find elsewhere in the LA basin, so when the gate electronics fail, the whole arrival sequence collapses. Call (424) 380-7998 and a live person answers, 24 hours a day.
Why West Hollywood Homes Are Different
West Hollywood’s housing stock skews toward 1920s Spanish Colonial bungalow courts, Art Deco dingbats, and Mid-Century Modern apartments that share a constraint: narrow setbacks and courtyard entries with almost no room for a swing gate to arc. That’s why slide gates dominate here. On the steep north-side streets above Sunset, along Doheny Drive and Larrabee, we regularly convert swing gates to slide gates because the driveway grade won’t let a swinging leaf clear the asphalt. The city’s intense UV exposure, amplified on south-facing hillside driveways, cooks circuit boards and powder-coat finishes faster than you’d see a few miles west in Santa Monica. Santa Ana winds push debris into track-mounted slide gates and torque the hinges on ornamental iron. And West Hollywood’s Building & Safety Department, separate from LADBS, enforces its own permit requirements for automated gate work. The housing here is older, the electronics are newer, and the terrain does not forgive a misdiagnosed opener.
Our Main West Hollywood Services
Three services account for most of what we do in West Hollywood: repair work on existing gates, full installations, and motor and opener service on the automation that drives them. Each has its own page for this city.
Gate Repair in West Hollywood
The average West Hollywood gate repair starts with a gate that either won’t open on command, grinds against the track, or opens and then refuses to close. We work on slide gates tucked into courtyard entries and swing gates on hillside driveways, and we write the price on paper before any work starts. Full detail lives on the Gate Repair in West Hollywood page, including what a typical operator replacement runs and how we handle the track realignments this city’s debris load requires.

Gate Installation in West Hollywood
New gate installations in West Hollywood usually mean a slide gate where a swing gate once strained, or a first automated gate on a courtyard entry that never had one. We measure the setback, check the grade, and quote a written price that includes the operator, the track, and the permit-ready paperwork. See the Gate Installation in West Hollywood page for the full scope and what drives cost on a hillside install.

Gate Motor & Opener in West Hollywood
When a West Hollywood gate operator burns out, it’s often heat and UV exposure that shortened the circuit board’s life, not the motor itself. We service nine automation brands, so we replace what failed rather than steering you toward an all-new system. The Gate Motor & Opener in West Hollywood page covers operator replacement cost, same-day repair calls, and the specific failure patterns we see on hillside properties above Sunset.

What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
Before
AfterGate Access Control in West Hollywood


Gate access control in West Hollywood is the layer that decides who gets through the gate and how: keypads, phone entry, card readers, and video intercoms wired into the property’s broader smart-home setup. In a city where high-end residential buildings along Santa Monica Boulevard and the Sunset Strip corridor expect smartphone access and integrated video, a failed access-control component doesn’t just inconvenience one resident, it breaks the entry sequence for every delivery, visitor, and ride-share that pulls up. Our Gate Access Control service covers diagnosis, replacement, and programming on whatever system is already installed.
Keypad Entry
Signs you need it
The keypad works intermittently after rain or direct afternoon sun, or a tenant reports the code stopped working overnight.
What it costs in West Hollywood
Keypad replacement typically runs $225-$475, including wiring check and reprogramming.
How we do it
We test voltage at the keypad, replace or rewire the unit, and reprogram all codes before photographing the finished work.
Video Intercom
Signs you need it
The driveway camera feeds a black screen to the indoor monitor, or call audio works but video doesn’t, or the smartphone app no longer rings when a visitor presses the button.
What it costs in West Hollywood
Video intercom repair or replacement typically falls between $350 and $1,100 depending on whether the camera, the indoor monitor, or the app bridge failed.
How we do it
We trace the signal path from gate station to monitor to network bridge, replace the failed component, and walk the homeowner through re-pairing the app.
What Gate Access Control Costs in West Hollywood
| Item | Typical range in West Hollywood |
|---|---|
| Keypad replacement | $225-$475 |
| Phone entry system repair | $300-$700 |
| Video intercom repair or replacement | $350-$1,100 |
Can you integrate my existing gate with my smart home system?
Yes. Most systems installed after 2016 use a network bridge or app that we can re-pair or replace, and we’ll document every setting so nothing gets lost. Call (424) 380-7998 to walk through your setup.
Do you replace just the keypad, or do I need a whole new system?
Usually the keypad alone. We test the controller first and only recommend more when the board itself is dead. The written price covers exactly what we replace.
Gate Parts & Welding in West Hollywood


Gate parts and welding in West Hollywood means keeping old iron alive. In a city full of 1920s bungalow courts and Art Deco dingbats, the gate often outlives the hinge, the post, or the roller. We weld, we fabricate, and we replace parts rather than pushing a full gate swap. Our Gate Parts & Welding work covers everything from a single hinge to a full post reset.
Hinge Replacement
Signs you need it
The gate sags visibly, scrapes the ground at the latch side, or the hinge pin has worn an oval into the barrel.
What it costs in West Hollywood
Hinge replacement typically runs $150-$450 per hinge, depending on whether the gate must come off the post and whether we weld the new hinge in place.
How we do it
We lift the gate, cut or unbolt the failed hinge, weld or bolt the replacement, and re-set the gate so it clears the ground by a consistent gap.
Rail Repair
Signs you need it
The slide gate jumps the track at a specific point every cycle, or the rail shows a visible dip or split at a weld seam.
What it costs in West Hollywood
Rail repair or realignment generally runs $350-$900, depending on the rail length and whether sections need replacement.
How we do it
We level the rail, re-weld or replace damaged sections, and run the gate through full open and close cycles to confirm it rides true.
What Gate Parts & Welding Costs in West Hollywood
| Item | Typical range in West Hollywood |
|---|---|
| Hinge replacement | $150-$450 per hinge |
| Rail repair or realignment | $350-$900 |
| Weld repair (cracked frame) | $200-$600 |
Can you weld a broken ornamental gate on site in West Hollywood?
Yes. We carry mobile welding equipment on the truck, and most frame cracks and hinge repairs are done on site the same visit. You get photos of the weld before and after.
Do you fabricate custom parts when originals are discontinued?
We do. On older Spanish Colonial properties, original gate hardware often no longer exists, so we fabricate a replacement that matches the load and the look. The price is written before we start.
Brands We Service in West Hollywood
West Hollywood gates run on more than one manufacturer, so we service nine: DoorKing and Elite operators are common on small courtyard entries, Mighty Mule appears on many hillside conversions, and LiftMaster on newer infill townhomes. We stock common boards and remotes at our Los Angeles office, and most part replacements dispatch the same day. See our brands for the complete list.
Pricing for Gate Repair in West Hollywood, CA

| Service | Typical range in West Hollywood |
|---|---|
| Keypad replacement | $225-$475 |
| Phone entry system repair | $300-$700 |
| Card reader replacement | $300-$800 |
| Video intercom repair or replacement | $350-$1,100 |
| Hinge replacement | $150-$450 per hinge |
| Post replacement | $800-$2,500 |
| Rail repair or realignment | $350-$900 |
| Weld repair (cracked frame) | $200-$600 |
| Gate roller replacement | $200-$500 |
Prices in West Hollywood run higher on hillside driveways where the gate must come off the post to work safely, and on properties where the automation is integrated into a larger smart-home system that needs re-pairing afterward. Every job gets a written price before we touch a tool, with no surprise invoice at the end.
Neighborhoods We Serve in West Hollywood
We work the whole 1.9 square miles. Hillside work above Sunset accounts for a good share of our slide-gate conversions and rail repairs, while the flats and courtyard buildings between Santa Monica Boulevard and Melrose keep us busy with operator and intercom service. Typical response is same-day for gate repair calls in the area.
- Sunset Strip corridor
- Norma Triangle
- Tri-West
- Hillside streets above Sunset (Doheny, Larrabee)
- Santa Monica Boulevard corridor
Service Area - Cities Near West Hollywood

For homeowners just outside West Hollywood, we cover the neighboring cities with the same written-price standard. We serve Beverly Hills, CA for its estate gates, Studio City, CA for hillside slide gates, Culver City, CA for its mid-century courtyards, and Santa Monica, CA where coastal moisture takes a different toll on gate hardware.
Serving West Hollywood, CA - Our Local Coverage Area
We’re based in the West Hollywood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in West Hollywood

Same-day service is standard for gate repair calls in West Hollywood. Our Los Angeles office coordinates dispatch locally, and a named, uniformed technician arrives with the parts truck stocked for the common DoorKing, Elite, and LiftMaster failures we see here. Call (424) 380-7998 and a live person answers.
It depends on the scope. Repairing or replacing an existing operator, keypad, or hinge typically does not require a permit. Substantial changes, like converting a swing gate to a slide gate or installing a new gate on a new post, may require West Hollywood Building & Safety approval. We quote that scope on paper and can flag what needs city review before any work begins.
Yes. Every visit ends with a photo log of what was found, what was adjusted, and what was installed, plus a written record of part numbers and settings. That record is yours to keep, so the next service call doesn’t start from zero. The price you agreed to is the price on the invoice, always.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What West Hollywood Customers Say
"Quoted in writing, installed on the day promised, and the price did not move. The crew was licensed and the number was on the paperwork."
- Wes A."They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N.





Before
After
Before
After