Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterGate Repair in Inglewood, CA
Gate access control in Inglewood typically runs $850-$2,400 for a keypad or phone entry system on an existing gate, and most repairs are finished the same day. The difference here is the housing stock: original welded wrought iron driveway and pedestrian gates from the 1950s and 1960s, now 60-plus years old, corroding faster than expected because Inglewood sits only 3-4 miles from the Pacific. Marine layer salt exposure means technicians in Inglewood regularly open control boxes to find corroded wiring, seized keypads, and failed magnetic locks. Call Vance Gate Repair at (424) 380-7998 for a written price before any work starts.
Why Inglewood Homes Are Different
Inglewood’s post-WWII bungalows and modest ranch homes, most built from the late 1940s through the early 1970s, still carry their original welded iron gates. Those gates are now 55-70 years old, and the chronic salt-laden air rolling in from the coast has been working on them the whole time. Hinge barrels rust through. Bottom rails develop pinhole rot. Latch hardware corrodes until the gate won’t stay closed.
The property-value surge tied to SoFi Stadium and the Hollywood Park redevelopment has pushed both longtime owners and incoming buyers to spend on security upgrades, especially gate repair and automation. A gate that was quietly failing for years suddenly matters when the neighborhood comps have doubled. On many established single-family blocks, properties have both a driveway gate and a separate wrought iron pedestrian walk-through gate, so one service call often means diagnosing two independent systems on the same lot.
That dual-gate configuration is more common here than in neighboring Hawthorne or El Segundo. And because the marine layer accelerates rust on uncoated iron, Inglewood technicians see corrosion at a severity that inland cities like Gardena simply don’t experience at the same rate.
Our Main Inglewood Services
Inglewood homeowners call us most often for two things: a failing gate that won’t open or close reliably, and rusted or broken components on a gate they want to keep. These are the services that keep Inglewood’s aging iron gates working.
Gate Repair in Inglewood
Most repair calls in Inglewood start with a gate that’s sagging on its hinges, dragging on the driveway, or refusing to latch. On 60-year-old welded iron, the failure is usually mechanical: a hinge pin that’s worn oval, a cracked weld at the frame corner, or a latch assembly corroded past function. We inspect the full gate before quoting anything, photograph what we find, and hand you a written price. If the gate can be repaired rather than replaced, that’s what we recommend. Gate Repair in Inglewood
Gate Installation in Inglewood
When a gate is too far gone to repair economically, or when a homeowner wants a new automated driveway gate after a purchase, installation in Inglewood means working with existing posts where possible and matching the street’s established look. We quote the full job in writing, including concrete work, steel fabrication, and automation if it’s part of the scope. No verbal estimate, no surprise change orders. Gate Installation in Inglewood
Gate Motor & Opener in Inglewood
Motors on Inglewood gates fail in predictable ways: limit switches drift, circuit boards corrode from salt air, and plastic gears strip after years of sun and moisture. We service nine automation brands, so we work on whatever motor is already mounted rather than steering you toward a replacement. The written quote includes the exact part number and labor before we touch anything. Gate Motor & Opener in Inglewood
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterGate Access Control in Inglewood
Access control in Inglewood means adding or repairing the systems that let the right people through the gate without leaving the house: keypads, phone entry, card readers, video intercoms. On this housing stock it commonly fails because the marine layer has corroded the keypad contacts or the wiring inside the control box. A Gate Access Control upgrade also matters more now that property values have risen around SoFi Stadium; buyers expect controlled access, not a key under the mat.
Keypad Entry
Signs you need it
The keypad is sun-faded, the buttons stick, or the unit works intermittently after rain or heavy fog.
What it costs in Inglewood
Keypad entry on an existing gate in Inglewood typically runs $850-$1,600 installed, depending on whether we’re replacing the unit or adding one where none existed.
How we do it
We mount the keypad, run or replace the wiring, program the codes, and photograph the finished install for your records.
Phone Entry
Signs you need it
Visitors can’t reach you from the gate, or the call box at the curb has stopped dialing out.
What it costs in Inglewood
Phone entry systems in Inglewood generally run $1,500-$2,400 installed, which includes the call box, the indoor intercom or app bridge, and programming.
How we do it
We install the call box at the gate, wire it to your phone line or cellular bridge, configure the directory, and test it from the curb.
What Gate Access Control Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Keypad entry (installed) | $850-$1,600 |
| Phone entry system | $1,500-$2,400 |
| Complete dual-gate access control (driveway + pedestrian) | $2,800-$5,600 |
Can you install access control on an old Inglewood iron gate?
Yes. We retrofit keypads, maglocks, and phone entry onto existing wrought iron gates regularly. The gate’s condition matters more than its age, and we’ll tell you in writing if the gate needs mechanical repair before electronics go on.
Why did my keypad corrode so fast in Inglewood?
Salt-laden marine air from the coast, 3-4 miles away, accelerates oxidation on exposed contacts and wiring. Sealed enclosures and dielectric grease on connections extend service life noticeably. Call (424) 380-7998 for an exact quote.
Gate Parts & Welding in Inglewood
Parts and welding work in Inglewood usually means keeping an original 1950s or 1960s iron gate alive rather than replacing it: new hinges, a rebuilt post, a cracked weld repaired and repainted. The marine layer means we’re often cutting out rusted sections and welding in fresh steel on gates that inland would never have rusted this fast. Gate Parts & Welding is the right call when the gate itself is still worth saving.
Hinge Replacement
Signs you need it
The gate sags, scrapes the ground on the latch side, or the hinge barrel has visible rust blooms and the pin is wobbling.
What it costs in Inglewood
Hinge replacement in Inglewood usually runs $350-$800 per gate, including grinding off the old hardware and welding on new hinges.
How we do it
We support the gate, cut off the old hinges, weld on new ones, test the swing, and photograph the finished welds.
Post Replacement
Signs you need it
The post is leaning, cracked at the base, or rusted through where it meets the concrete.
What it costs in Inglewood
Post replacement in Inglewood typically runs $700-$1,400 per post, depending on whether the old footing can be reused or must be re-poured.
How we do it
We cut the old post, break out the footing if needed, set a new post in concrete, and re-hang the gate with fresh hardware.
What Gate Parts & Welding Costs in Inglewood
| Item | Typical range in Inglewood |
|---|---|
| Hinge replacement | $350-$800 per gate |
| Post replacement | $700-$1,400 per post |
| Custom weld repair (cracked frame or rail) | $250-$650 per repair |
Can you weld my original Inglewood iron gate instead of replacing it?
Yes, and that’s usually the better option for a 60-year-old wrought iron gate that matches the street’s character. We cut out the rusted section, weld in fresh steel, grind it smooth, and repaint. The repair is documented with photos before we leave.
How long do welded repairs last in Inglewood’s salt air?
With proper prep and a marine-grade primer and paint, a welded repair on an Inglewood gate can match the life of the adjacent original steel. Raw welds left uncoated will rust again within a season. Call (424) 380-7998 for a written estimate.
Brands We Service in Inglewood
We work on BFT, Linear, Viking, and Ghost Controls, among others, so your existing motor stays in place when it can be repaired. Common boards, limit switches, and remotes for these brands are stocked locally, and most part swaps happen in one visit. See our brands for the full list.
Pricing for Gate Repair in Inglewood, CA
| Service | Typical range in Inglewood |
|---|---|
| Keypad entry (installed) | $850-$1,600 |
| Phone entry system | $1,500-$2,400 |
| Complete dual-gate access control | $2,800-$5,600 |
| Hinge replacement | $350-$800 per gate |
| Post replacement | $700-$1,400 per post |
| Custom weld repair | $250-$650 per repair |
| Gate motor replacement | $950-$2,200 |
| Full driveway gate installation (automated) | $4,500-$12,000 |
Prices in Inglewood run higher when the gate needs structural work before electronics go on, which is common on 60-year-old iron. Salt corrosion on wiring and posts also adds labor. Whatever the job, you get the written price before any work starts, and that’s the price you pay.
Neighborhoods We Serve in Inglewood
We cover the full city, and a crew from our Los Angeles office typically reaches any Inglewood address within 60-90 minutes for emergencies.
- Morningside Park
- Downtown Inglewood
- North Inglewood
- Inglewood Knolls
- Century Heights
Service Area - Cities Near Inglewood
Our gate repair work extends beyond Inglewood to the surrounding South Bay and Westside. We regularly serve Hawthorne, CA, Culver City, CA, Gardena, CA, and Los Angeles, CA.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs About Gate Repair in Inglewood
Our Los Angeles office dispatches crews to Inglewood daily, and typical arrival is within 60-90 minutes for urgent calls. A live person answers (424) 380-7998 24/7, no voicemail loop and no callback queue.
Most repair work, hinge replacement, and motor swaps don’t require a permit since the gate already exists. New automated driveway gates may need an electrical permit depending on scope. We confirm requirements before the quote is written and handle the paperwork.
Yes, and on many Inglewood properties that’s exactly what’s needed. We diagnose both gates during one visit, write one quote covering both, and complete the work without a second trip unless parts must be ordered.
If your Inglewood gate is sagging, corroding, or refusing to open, call (424) 380-7998. We’ll inspect it, write the price down, and leave you a documented record of everything we found and everything we fixed.
What happens when you call
- 1A real person answersNo phone trees - talk to a local gate repair pro.
- 2You get an upfront price rangeHonest numbers before anyone is dispatched. No surprises.
- 3We come out and measureLicensed & insured, at a time that suits you - the visit and the quote are both free.
- 4You get the price in writingLine-itemed, yours to keep, and nothing starts until you say go.
What Inglewood Customers Say
"They installed the opener and left me a diagram of the wiring and the limit settings. When I needed a second remote programmed I could do it myself."
- Nadine C."Honest about what did not need doing. Told me the operator had years left and only the control board needed replacing."
- Douglas N."Good work on a long driveway gate. Arrived when they said, finished when they said."
- Sofia E.