Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Inglewood
Gate installation in Inglewood usually takes one to three days on site, depending on whether we’re setting a single driveway gate or coordinating a dual-gate system. Most single driveway gates run $2,800 to $5,900 installed, while a paired driveway gate plus separate pedestrian gate typically lands between $6,500 and $12,000. We serve every Inglewood neighborhood from Morningside Park to the blocks off Arbor Vitae near Hollywood Park, and we quote a written price before any work starts. Call (424) 380-7998 and a live person answers, day or night.
Inglewood’s housing stock creates a specific set of gate problems. The post-WWII bungalows and ranch homes built between the late 1940s and early 1970s often still carry their original welded wrought iron gates. Those gates are now 55 to 70 years old. The marine layer that rolls in from the Pacific, sitting just three to four miles west, has been working on that iron for decades. What we find here, we don’t see at the same frequency in Gardena or Hawthorne: hinge barrels rusted through from the inside, bottom rails that crumble when you tap them, and post footings that cracked because salt-laden moisture wicked down the steel and into the concrete.
Why Vance Gate Repair Is Inglewood’s Preferred Gate Installation Company
Adrian Vance started this company in 2014 out of commercial access-control work, and the documentation habit from that world carries into every residential job we do in Inglewood. Before our crew arrives, you get the technician’s name and photo. Before any tool comes off the truck, you get a written scope and a written price. And before we leave, you get a photo log of what we found, what we set, and what we installed. That’s the Haven Standard, and it applies on every single visit.
The 365-Day Done Right Promise covers all completed installation work in Inglewood. If something isn’t right within a year, we make it right at no charge. No argument, no fee, no expiration date inside that window. And if you’ve already got a written estimate from another gate company, bring it to us. We’ll review it at no cost and tell you what’s fair, what’s missing, and what you don’t need.
We dispatch from our Los Angeles office and crews serve Inglewood locally. Background-checked, uniformed technicians run every job. And the phone at (424) 380-7998 is answered by a live person at any hour, no voicemail loop and no callback queue.
Our Gate Installation Services in Inglewood
Driveway Gate Installation
Most Inglewood driveway gates are swing-style, built for the older ranch lots that dominate the neighborhoods between La Brea and Prairie. We size the operator to the actual gate weight and leaf width, not to a catalog number. A 14-foot double driveway gate in Inglewood typically needs an operator with a rack and pinion or articulating arm drive rated for continuous use, because the dual-gate norm means the driveway gate cycles more often than it would on a property where it’s the only entrance. We also account for the soil. Inglewood’s marine layer doesn’t just eat steel; it destabilizes old concrete footings. When we set new hinge posts, we over-excavate, add concrete collars, and wrap the buried steel so water can’t wick down from the post base and freeze the footing apart over time.
Double Gate Installation
A 16-foot double gate across a long Inglewood driveway is a different animal from a 10-foot single. The leaf weight doubles, the wind load from the marine layer stacks against the panel, and the post at the center of the travel arc takes lateral stress that a single gate post never sees. On a recent install off Arbor Vitae near the Hollywood Park side, we set a Viking swing gate operator with a rack and pinion drive on a 16-foot double gate and poured new 30-inch post footings with extra concrete collars after we found the old piers cracked from decades of salt exposure. The customer got a photo log of the old footing condition before we poured, and a written record of every part number installed. That’s how we leave every Inglewood job.
Pedestrian Gate Installation
Inglewood has a security-gate culture that runs deep. On many established single-family blocks, the property has a driveway gate and a separate wrought iron pedestrian walk-through gate, each with its own hinge hardware, latch, and often its own automation. Coordinating those two systems is a distinctly Inglewood pattern. We see it far less in Hawthorne or El Segundo. When we install a new pedestrian gate, we match the hinge post diameter to the actual walk-through clearance, keep the latch hardware at ADA-reachable height, and if the homeowner wants automation, we’ll usually spec a solar gate opener for the pedestrian entry when trenching power to the front post would cut through mature tree roots or run under a sidewalk.
Swing Gate Installation
Swing gates remain the default for Inglewood’s ranch-style lots, but soil conditions decide whether the install is straightforward. The city sits on ground that shifts with seasonal moisture, and thirty-year-old concrete pads under old gate posts are often cracked below the visible surface. We core-drill and test the existing footing when we’re replacing a gate on an existing post. If the pad is fractured, we demo and pour new footings. If it’s solid, we sleeve the post and build up. We don’t guess. We photograph what we find and document what we set.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Inglewood
We work on whatever motor is already on the property. On Inglewood installs, we commonly install and service Linear, Viking, Ghost Controls, and DoorKing operators, alongside five other major automation brands. We don’t steer customers toward a replacement motor just because it’s easier for us. If your existing operator is sound and the issue is the gate itself, we fix the gate. We keep common parts stocked for fast turnaround on Inglewood jobs, and when a specific control board or arm bracket needs ordering, we tell you the lead time in writing before we start.
Common Gate Installation Problems We See in Inglewood Homes
Here’s what we encounter most when we’re called out to install or replace gates in Inglewood:
- Hinge post rot and cracking from salt-laden marine air. The old steel posts set in the 1950s and 1960s rust from the inside out at the concrete line. A gate that looks stable may be sitting on a post with an inch of steel left below grade. New installations sag within a few years if the footings aren’t over-excavated and the buried steel isn’t wrapped.
- Dual-gate sites with mismatched safety systems. One gate may have a modern loop detector while the other has none. Vehicles pulling out trip only the driveway gate, and the pedestrian gate stays closed, which confuses anyone new to the property. We standardize both gates so the safety logic matches.
- Undersized solar gate openers on shaded, long driveways. Inglewood’s persistent June gloom cuts solar output, and a wide double gate on a property with mature tree canopy needs a larger panel and a deeper battery bank than a generic solar kit provides. If the gate won’t cycle on a cloudy morning, that’s usually the cause.
- Original wrought iron pedestrian gates cracking at the hinge barrels. These 60-plus-year-old gates were built for manual operation. When a previous owner added automation, the added torque found the weakest point. We see cracked welds and bent hinge pins on a large share of Inglewood pedestrian gates we replace.
Pricing for Gate Installation in Inglewood, CA
We post honest ranges because that’s how we work. A single swing driveway gate with a standard operator in Inglewood typically runs $2,800 to $5,900, depending on gate width, post condition, and whether we’re reusing an existing operator. A double driveway gate with a heavy-duty operator and new footings runs $5,500 to $9,500. Adding a separate pedestrian walk-through gate with its own hardware and solar opener adds $3,200 to $6,500. Those ranges include the site assessment, written scope, installation, operator programming, safety photocells, and the documented photo log. The price is written and agreed before any work starts. No surprise invoice at the end.
We Also Serve Cities Near Inglewood
Our crews regularly handle Gate Installation in Hawthorne, Culver City, Gardena, and Los Angeles. If you’re in any of those areas and need a written price for a new gate or replacement, we dispatch from the same LA office and bring the same Haven Standard to every job. For Inglewood specifically, our local familiarity with the housing stock and gate culture means we’re not learning your block from a map on the way in.
Serving Inglewood, CA - Our Local Coverage Area
We’re based in the Inglewood area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Inglewood
Inglewood double gates need heavier operators because the city’s housing stock skews toward older ranch-style lots with 14- to 16-foot double gate spans, and the marine layer adds rust and binding to hinges that a dry inland gate doesn’t face. A gate that moves freely on day one gets progressively harder to cycle as salt-laden air accelerates corrosion at the hinge barrels and roller brackets. We size operators for the actual gate weight plus the drag that develops over time, not the manufacturer’s best-case cycle rating. Call (424) 380-7998 for an exact written quote, and we’ll include the operator sizing calculation in the scope.
We assess the existing gate before we recommend anything. If the wrought iron pedestrian gate is structurally sound with intact hinge barrels and no through-wall rust at the weld points, we’ll often reuse it and upgrade the hardware, latch, and possibly add a solar opener. If the frame is rusted through or the hinge pins are cracked, replacement is the honest answer. In Inglewood, we encounter both scenarios regularly, because the original pedestrian gates were built with thicker steel in some neighborhoods and lighter steel in others. Either way, you’ll see a written condition report with photos before any work proceeds.
Yes, but the panel sizing and battery bank have to match the actual shade pattern, not the zip code average. Long Inglewood driveways with mature tree canopy lose direct sun for parts of the day, and during the persistent June gloom, a small panel won’t cycle a wide double gate. We oversize the panel, run a deeper battery bank, and position the panel where it gets maximum exposure. On the Arbor Vitae install, we put a FAAC solar gate opener on the pedestrian entry because trenching power to the front post would have cut through mature tree roots. Solar worked where a line-voltage run would have caused more damage than it solved.
California law requires automatic gate openers to include a reversing mechanism or other safety device that complies with UL 325, which in practice means photo-eyes, edge sensors, or both. In Inglewood, we install safety photocells as standard on every automated gate, and we position them at the correct height and alignment so they actually stop the gate before contact, not after. The photo-eye is the infrared beam that stops the gate if something crosses the path. We set it, test it, and photograph the alignment before we leave. That photo goes in your job record.
Newer Inglewood properties near SoFi Stadium and the Hollywood Park redevelopment sit on tighter lots with shorter setback distances. A swing gate needs room to arc inward or outward, and that room often isn’t there. A slide gate runs parallel to the fence line and uses less driveway depth. We’re installing more slide gates in that part of Inglewood for exactly that reason. Slide gate installs also require a rear track, a roller system, and a chain or rack drive, so we spec the operator to the gate length and weight and set the track on a stable base so it doesn’t shift with seasonal soil movement.
Call Vance Gate Repair for Gate Installation in Inglewood
If you’re in Inglewood and need a new driveway gate, double gate, or pedestrian gate, call (424) 380-7998. You’ll get a live person on the phone, a written price before any work starts, and a documented photo record when the job is done. That’s Clause 1 and Clause 4 of the Haven Standard, and they apply on every job we do in Inglewood. Estimates are free.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Inglewood since 2014.
Gate Installation in Nearby Areas