Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterLinear Keypad & Intercom Repair: The Inglewood Owner's Guide
We stock and install Linear-compatible keypad and intercom replacement parts across Inglewood, with most repairs running between $240 and $580 installed, depending on the model and whether the wiring is intact. The work is usually completed the same day we arrive. Most Inglewood homeowners discover the problem the same way: a keypad that stopped accepting the code, a call box that rings but won't release the gate, or a display that went dark after a rainstorm.
Linear keypads and intercoms are simple, durable devices, but they live outside. In Inglewood's marine-layer mornings and afternoon sun, the weak points are predictable: membrane keypads crack, wire splices corrode, and the speaker grilles clog with fine dust. When a part fails, the gate still works mechanically, but the access point is dead, and that means delivery drivers can't reach the call box and family members can't punch in the code.
Which Linear Models This Applies To
We repair and replace keypads and intercoms across Linear's residential access lines, including the AE-100, AE-200, AM-KP, AP-5, and the older MC series call boxes that still show up on Inglewood homes built in the 1990s. The first thing we do is read the model label, usually printed on the back of the keypad housing or inside the intercom faceplate. That label narrows the replacement part to the exact revision, because a Linear AE-100 from 2008 does not directly swap with the version from 2019, even though the cases look identical.
OEM Linear parts cost more and match the original housing, but some quality aftermarket keypads, like the LiftMaster-compatible universal models we also stock, install faster and hold up better to UV exposure. We'll walk through both options before quoting anything. Vance Gate Repair Inglewood is an independent service provider, not affiliated with Linear, which means we're not tied to one brand's parts bin. We also stock parts for LiftMaster, Mighty Mule, and Ghost Controls, so if a different-brand entry pad is on the property, we can match it without sending a second truck.
Signs Your Linear Keypad & Intercom Repair Is Failing
- Code accepted but gate doesn't open. This usually points to a failed relay inside the keypad or a corroded splice where the keypad wire meets the operator's open terminal. The keypad is sending a signal; the connection is where it dies.
- Some buttons work, others don't. The membrane switch contacts wear unevenly, so the most-used digits (often the first two of the code) fail first. This confirms the keypad itself needs replacement, not the operator.
- Intercom rings inside but no audio. The speaker and microphone share a common ground wire. When that ground corrodes at the outdoor junction, the ring signal still passes but the audio path is open. We find this often on Inglewood properties with older unpainted steel boxes.
- Display is blank or shows scrambled segments. The LCD driver chip or the ribbon cable to the display has cracked from heat cycling. Intercoms facing direct afternoon sun in Inglewood see this sooner than shaded units.
- Keypad works after cleaning but only for a few days. Moisture is wicking into the housing through a failed gasket. If the board has visible corrosion, patching the seal won't save it; the board gets replaced.
BeforeAfterReplacement Cost & What's Included
In Inglewood, a Linear keypad replacement typically runs $240 to $390 installed. A full intercom or call-box replacement runs $360 to $580 installed, more if the old wiring needs to be re-pulled or a new transformer is required. The range depends on the model on the wall, whether the existing backplate and wiring can be reused, and whether we're replacing one part or the whole weather-sealed assembly.
Every quote includes the part, the labor, the wiring check, and a photo record of what was removed and what was installed. The written price is handed over before any work starts, under Haven Standard Clause 1. There's no open-ended hourly billing on a keypad swap. The labor is covered by our 365-Day Done Right Promise: if the replacement fails or the installation isn't right within a year, we make it right at no charge.
DIY or Call Us?
What an owner can safely do: note the model number, test the code at the keypad and at the operator's manual open button, and check whether the intercom breaker or transformer has tripped. If the gate opens from the operator's button but not the keypad, the problem is the access device, not the motor. Those checks take ten minutes and give us useful information before we dispatch.
Where DIY goes wrong: opening a Linear intercom faceplate to probe wires while the gate's transformer is live, or splicing keypad wires into the operator's board without confirming the common-ground configuration. Linear keypads run on low voltage, but a crossed wire can smoke the operator's control board, and that turns a $240 keypad job into a $900 operator repair. If the gate motor is also misbehaving, do not open the operator cover, the capacitor inside holds a charge even when power is removed. For a keypad or intercom diagnosis in Inglewood, call us at (424) 380-7998 and we'll send a technician with the part on the truck.
FAQs
A Linear keypad or intercom in Inglewood typically lasts 7 to 12 years, depending on sun exposure, how often the gate cycles, and whether the housing gasket was installed correctly. Inland-facing units that bake in the afternoon heat fail sooner, and we replace keypads in Inglewood regularly on gates that see 30 or more cycles a day.
Most failing Linear keypads are replaced rather than repaired, because the membrane switch and the circuit board are sealed as one assembly and not worth rebuilding. A sticking button or a dead display is the end of that housing. Intercom call boxes sometimes only need a new speaker or a corroded terminal block cleaned, which is a repair we do on the first visit. Call (424) 380-7998 and describe the symptom; we'll tell you which path applies.
A standard Linear keypad replacement takes about 45 minutes, and an intercom or call box swap takes about 90 minutes, including the wiring check and a full test of the gate cycle. We carry the common Linear parts on the truck, so the work is often done the first trip.
Yes. Our Inglewood service vehicles carry the most common Linear keypad replacements and intercom repair parts on board, plus universal aftermarket pads that work when the original model is discontinued. If you want confirmation before we dispatch, tell us the model number from the back of the unit and we'll verify the stock over the phone.
Call Vance Gate Repair Inglewood
If your Linear keypad or intercom is down, call (424) 380-7998. A live person answers at any hour, we'll ask what the keypad is doing and which model is on the wall, and we'll give you a written price before any work starts. Name what you found. Name what it costs. Name what you left behind. That's how we run every job in Inglewood, from a single entry pad to a full gate access system.
Written by Adrian Vance, Owner, Vance Gate Repair Inglewood at Vance Gate Repair Inglewood, serving Inglewood and nearby areas.