Free on-site gate assessment - hinges, posts, and your LiftMaster or Nice gate operator checked before anything is quoted
The assessment is free and the quote is the invoice.
Before
After
Before
After
Before
AfterFast, Reliable Gate Installation Across Los Angeles
Gate installation in Los Angeles costs between $2,800 and $9,500 for most residential projects, with sliding gates running $3,200-$8,000 and swing gates $2,800-$7,500 depending on size, material, and whether the driveway has decomposed granite or poured concrete under the track path. We install driveway gates, pedestrian gates, sliding gates, swing gates, double gates, and security gates across Los Angeles, from Silver Lake to the San Fernando Valley, with a written price in your hand before any work begins. Call (424) 380-7998 for a free measure and a written quote.
What sets Los Angeles apart from other cities we work in isn’t the style of the gates. It’s what the wind does to them. Santa Ana gusts at 50 to 80 mph hit solid infill gates like a sail, and a post that wasn’t set deep enough in saturated hillside clay will lean within one winter. We plan every Los Angeles installation around wind load first, then aesthetics.
Why Vance Gate Repair Is Los Angeles’s Preferred Gate Installation Company
We’ve installed and repaired more than 22,000 gates since 2014, and a large share of that work has been in Los Angeles, where the housing stock demands more than a stock catalog gate. Adrian Vance founded this company out of commercial access-control work, and the documentation habit carried over: every Los Angeles job leaves you with a photo record of what was found, what was set, and what was installed. No future technician has to guess, and you never pay twice to rediscover a problem.
Our technicians are background-checked, uniformed, and dispatched with their name and photo sent to you before arrival. The price is written and handed over before we touch a tool, under Haven Standard Clause 1. And if something isn’t right after we leave, the 365-Day Done Right Promise covers it for a full year. A live person answers the phone at (424) 380-7998 at any hour, not a voicemail loop.
We work on all nine major gate-automation brands: LiftMaster, FAAC, BFT, Linear, Viking, Ghost Controls, DoorKing, Elite, and Mighty Mule. That matters in Los Angeles because so many homes have whatever motor a previous contractor put in. We service and install around what’s already on the property rather than steering you toward a replacement you don’t need.
Our Gate Installation Services in Los Angeles
Driveway Gate Installation
A driveway gate in Los Angeles has to hold up against two things: the daily open-close cycle from car-centric life and the seasonal wind events that push untested welds and shallow footings to failure. We size the operator to the gate’s wind-load rating, not just its weight, and set posts below the frost line with high-strength grout where hillside clay is present. Common configurations in the flatlands east of downtown and the South Bay include slide gates on block-wall perimeters and swing gates on masonry piers.
Pedestrian Gate Installation
Los Angeles pedestrian gates are often the weak point in a perimeter: the latch plate was never aligned, the closer is undersized, or the post has worked loose after years of slamming. We install pedestrian gates with commercial-grade hinges and closers, and we photograph the alignment before and after. In neighborhoods like Los Feliz and Silver Lake where 1920s and 1930s stucco piers are common, we build around the existing masonry rather than tearing it out.
Sliding Gate Installation
Sliding gates in Los Angeles face a specific enemy: decomposed granite. DG is the default driveway surface across much of the city, from the East Side into the Valley, and the fines migrate into the bottom track after every Santa Ana or rain event. A track that wasn’t sealed on day one will grind the drive gear and burn out the operator motor within a season or two. We install sliding gates with sealed tracks, raised track mounts where the driveway grade allows, and operators sized for the added resistance of DG fines.
Swing Gate Installation
Swing gates on Los Angeles hillside properties fail in predictable ways. The post leans because the footing was poured too shallow for clay that expands and contracts through the wet-dry cycle. The gate sags because the hinge was welded to the post at the wrong point. We set posts in deeper footings with high-strength grout, use adjustable hinges, and match the operator to the gate’s wind-load rating. After a Santa Ana gust snapped a swing gate off its hinge post in Silver Lake, our crew reset the post, corrected the sag, and reinstalled a LiftMaster operator with a battery backup, then walked the owner through the manual-release procedure for the next power cut.
Security Gate Installation
A security gate in Los Angeles isn’t about looks. It’s about making the property a harder target. We install steel security gates with tamper-resistant hardware, reinforced hinge posts, and operators with battery backup so the gate still functions during a blackout. For properties in the hills or on quiet streets where response time from any gate company matters, a documented install with a photo log of every weld and every limit-switch setting means the next technician isn’t starting from scratch. That’s the standard we write into every job.
What happens when you call
- 1
A real person answersNo phone trees - you reach a local pro.
- 2
You get an upfront price rangeHonest numbers before anyone is dispatched.
- 3
A background-checked tech heads outLicensed & insured, dispatched right away.
- 4
You approve before work beginsNothing starts until you say go.
BeforeAfterTrusted Brands We Service in Los Angeles
We install and service Linear, Viking, Ghost Controls, and DoorKing operators, along with five other major brands. Los Angeles customers often inherit a motor from a previous contractor, and we’d rather tune what’s there than sell you a new one for the sake of it. We stock common parts locally so a failed control board or photo-eye doesn’t leave your gate stuck for a week waiting on freight. If you already have a written estimate from another company, bring it to us and we’ll review it at no cost.
Common Gate Installation Problems We See in Los Angeles Homes
- Undersized post footings on hillside clay. Winter rain saturates the clay, the ground expands, and a shallow footing shifts. The hinge post leans, the gate drags, and the operator burns out trying to move a gate that’s fighting the ground. In hillside neighborhoods like Laurel Canyon and the Hollywood Hills, we see post lean from seismic settling that dates back to post-Northridge patterns.
- Solid infill gates installed without wind-rated operators. A solid wood or steel gate acts like a wall in a Santa Ana. If the operator wasn’t spec’d for wind load, the gears strip and the motor fails. We size operators to wind exposure before we quote anything.
- Slide gate tracks laid directly on decomposed granite. DG fines get into the track, grind the rack and pinion, and seize the drive gear. Proper installation here means sealing the track from day one and clearing it on every service call. We do both.
- Coastal corrosion on gate hardware. The marine layer along West LA, Venice, and the South Bay accelerates rust and galvanic corrosion on hinges, bottom rollers, and conduit fittings. Inland hardware specs fail fast within a few miles of the coast. We use corrosion-resistant hardware and coatings on coastal-zone installs.
Pricing for Gate Installation in Los Angeles, CA
Most slide gate installations in Los Angeles run between $3,200 and $8,000, including the operator, track, steel or wood gate, and installation. Swing gates typically land between $2,800 and $7,500 for a double gate with a wind-rated operator; single swing gates start around $2,200. Pedestrian gates run $1,200-$3,800 depending on steel gauge and hardware. Security gate upgrades with tamper-resistant hardware and battery backup add $600-$1,500 to the base install.
What moves the price: gate width and wind-load rating, soil condition (hillside clay needs deeper, grouted footings), whether the driveway is DG or poured concrete, and whether you need a power run trenched to the gate. The price we quote is the price on the invoice. Written, before work begins, under Clause 1 of the Haven Standard. Call (424) 380-7998 for a free measure and a written price for your specific Los Angeles property.
We Also Serve Cities Near Los Angeles
Our Los Angeles crews regularly install and repair gates in Huntington Park, Bell Gardens, Gardena, and Inglewood. If you’re just outside the city line and need a Gate Installation team that already knows the soil, wind, and driveway conditions of your block, call us. We serve the wider Los Angeles metro area with the same written-price standard on every job.
Serving Los Angeles, CA - Our Local Coverage Area
We’re based in the Los Angeles area and know this community well. Use the map below to see our service coverage - if you’re nearby, we can almost certainly help.
FAQs - Gate Installation in Los Angeles
Locate the manual release mechanism on your operator. On most LiftMaster, Linear, Viking, and Ghost Controls swing and slide operators, there’s a release cord or keyed lever near the motor head. Pull or turn it to disengage the gate from the motor, then push the gate by hand along its track or arc. For slide gates, push slowly and check for debris in the track first. For swing gates, have a second person hold the gate so it doesn’t swing uncontrolled. Never force a gate that’s resisted; a gate that won’t move manually may have a seized roller or a bent track, and forcing it can damage the rack or hinges. If you’re unsure which release type your operator uses, call (424) 380-7998 and our technician will talk you through it while you’re standing in front of the motor.
Only if the post footings are deep enough, the hinges are sized for the wind load, and the operator is rated for a solid infill panel. A solid wood gate catches wind like a sail. In the San Fernando Valley, where Santa Ana gusts routinely hit 60 to 80 mph, a 6-foot solid wood swing gate needs a deeper grouted footing and a wind-load-rated operator, not a standard residential motor spec’d for a lighter open-frame gate. We install solid wood gates with steel frame reinforcement on request. Untreated, a solid wood gate on shallow posts will lean and strip its opener within the first strong wind season. Call (424) 380-7998 and we’ll measure your driveway and give you a written price for a gate built to your street’s actual wind exposure.
Yes, in most cases. The City of Los Angeles requires permits for driveway gates that alter the driveway approach, connect new electrical wiring to an operator, or exceed certain height and setback limits. Gates under 7 feet tall and not encroaching on public right-of-way may not require a building permit, but the electrical run to the operator and any new conduit work generally do. We’ll tell you whether your specific project needs permitting and what the process looks like before you commit to anything. We don’t bury permits in the fine print, and we won’t start electrical work that should have been permitted. Call (424) 380-7998 for a straight answer on your street.
Decomposed granite has migrated into the bottom track. DG is the default driveway surface across much of Los Angeles, and after every rain or Santa Ana, the fines wash or blow into the track, settle under the drive gear, and grind against the rack and pinion. Left uncleared, it seizes the gear and burns out the operator motor. Proper installation means sealing the track from day one and raising track mounts where the driveway grade allows. On service calls, we clear the track, inspect the gear for wear, and photograph the condition so you have a record. If your slide gate grinds after weather, shut it off at the breaker and call (424) 380-7998. Continued operation will damage the gear beyond economical repair.
Not reliably, unless you add a battery bank or a supplemental AC power run. Solar gate openers need direct sun for three to five hours a day to keep the battery charged through daily use. On a shaded, tree-lined street in Los Feliz or Silver Lake, where mature sycamores and oaks block sun for most of the day, a solar panel won’t keep up with even a modest daily cycle count, and you’ll end up manually releasing the gate every few days. A low-voltage AC run or a larger solar array with more battery capacity can work, but it’s not the same as a standard solar kit. Call (424) 380-7998 and we’ll assess the actual sun exposure on your driveway and quote you a system that works, not one that stalls in week two.
Get Your Los Angeles Gate Installed Right
If you’re in Los Angeles and need a new driveway gate, a security gate, or a slide or swing gate built to survive Santa Ana winds and decomposed granite, call us at (424) 380-7998. We’ll schedule a free measure, walk you through wind-load ratings and footing specs for your street, and hand you a written price before any work begins. No call for a quote. No surprise invoice. Just a gate that stays square in the wind and a documented record of what we installed and how it’s set. That’s the standard on every Los Angeles gate we touch.
Written by Adrian Vance, Owner at Vance Gate Repair, serving Los Angeles since 2014.
Gate Installation in Nearby Areas